Aygaz prints a camp furnace in one piece with LOOP PRO X
© 2026 LOOP 3D Additive Manufacturing Ltd

Aygaz, founded in 1961, is an integrated LPG company. In 2018 it set up the first R&D centre in its industry, and it found LOOP 3D through Plug and Play İstanbul.
The challenge
Aygaz wanted faster, better prototype development and more capacity. Large prints had to come out as one piece instead of several glued parts, and the materials needed high mechanical and temperature resistance.
The solution
As a pilot, Aygaz asked LOOP 3D to print two parts of a camp furnace design (240 x 240 x 80 mm). In the real product one part is plastic and the other steel, and both had to resist heat. The parts were printed successfully in DYNAMIDE® GF, a glass-fibre reinforced material, on the LOOP PRO X.
“LOOP 3D’s product, LOOP PRO X, provided a suitable solution for Aygaz’s needs.”
— Burak Yaman, Research and Development Manager at Aygaz
“As a result of our technical investigations, we became quite interested in the solution provided by LOOP 3D.”
— Taha Erdem Yıldırım, Research and Development Assistant Manager at Aygaz
Download the full case study (PDF)



