SLS vs SLA vs FFF
Three industrial 3D printing processes, side by side: materials, part size, strength, surface finish and what each one is best for. All three are made in our Milton Keynes facility.
Process comparison
| Property | SLSSelective Laser Sintering | SLAStereolithography | FFFFused Filament Fabrication |
|---|---|---|---|
| How it works | A laser fuses nylon powder, layer by layer | A UV laser cures liquid resin, layer by layer | Reinforced filament is laid down, layer by layer |
| Material | PA12 nylon | Somos® WaterShed resin | DYNAMIDE® CF and GF (fibre-reinforced polyamide) |
| Colour | Black | Transparent | Black and grey |
| Max part size | 400 x 400 x 540 mm | 450 x 450 x 400 mm | 500 x 340 x 485 mm (LOOP PRO X+ TURBO) |
| Layer thickness | 0.1 mm | 0.1 mm | 0.1 to 0.263 mm |
| Support structures | None needed | Needed, removed after printing | Breakaway support, removed after printing |
| Tensile strength | 48.2 MPa | 50.4 MPa | CF 105 MPa, GF 85 MPa |
| Heat deflection (0.45 MPa) | 147 °C | – | CF 214 °C, GF 190 °C |
| Surface off the machine | Slightly grainy, matte | Very smooth | Visible layer lines |
| Vapour smoothing | Yes | No | Yes, DYNAMIDE® GF |
| Best for | Functional parts, complex shapes, production runs | Fine detail, clear parts, investment casting patterns | Strong, stiff parts, jigs and fixtures, large parts |
Strength and temperature values are typical datasheet values in the X-Y direction, indicative only. Real parts depend on geometry, orientation and finishing.
Which one should I choose?
Choose SLS if…
- You need strong, functional nylon parts
- Your part has complex or internal features
- You need tens or hundreds of parts
Choose SLA if…
- You need fine detail and a smooth surface
- You need clear, see-through parts
- You will paint or finish the part to a high standard
Choose FFF if…
- You need maximum stiffness and strength
- You need parts that work at high temperatures
- You need large parts, jigs or fixtures
Finishes by process
| Finish | What it does | Available for |
|---|---|---|
| Standard | De-powdering and bead blasting (SLS), support removal (SLA, FFF), inspection | SLS, SLA, FFF |
| Sanding, painting, varnishing | A very high standard of cosmetic finish | SLA |
| Dyeing | Black only | SLS |
| Vapour smoothing | Sealed against liquids and gases, injection-moulding-quality surface | SLS, FFF (DYNAMIDE® GF) |
Choosing a process
Which process gives the strongest parts?
FFF in DYNAMIDE® CF has the highest tensile strength we offer (105 MPa in X-Y). For complex shapes that must be strong in every direction, SLS PA12 is often the better choice because it needs no supports.
Which process gives the smoothest surface?
SLA has the smoothest surface straight off the machine. SLS and DYNAMIDE® GF parts can be vapour smoothed for a sealed, injection-moulding-quality finish.
Can I get transparent parts?
Yes, with SLA in Somos® WaterShed, an optically clear resin.
Which process is best for production runs?
SLS: we nest many parts in each build and need no supports, so it scales well from one-offs to repeat production.
Still not sure which process?
Upload your file for an instant price, or describe your part and our engineers will recommend the right process.
