FFF design guide

Designing parts for FFF 3D printing

The key numbers for designing fibre-reinforced FFF parts that print well: wall thickness, overhangs, holes, clearances and tolerances. Our engineers check every file before printing, so if something is close to a limit, we will tell you.

At a glance

FFF design rules

FeatureRecommendedNotes
Minimum wall thickness1 mmUse 2 mm or more for walls that carry load.
Dimensional tolerance±0.5% (at least ±0.3 mm)Tell us about critical dimensions when you order.
Minimum hole diameter2 mmVertical holes print rounder than horizontal ones. Drill for a precise fit.
Overhangs without supportUp to 45°Steeper overhangs use our BREAKAWAY+ support.
Embossed and engraved detail1 mm high or deepText reads best on top faces.
Clearance between mating parts0.3 mmFor parts that fit together after printing.
Maximum part size500 x 340 x 485 mmOn our LOOP PRO X+ TURBO printers.

General guidance for DYNAMIDE® CF and GF on our FFF systems. Results depend on geometry, size and orientation. DYNAMIDE® CF and GF material data.

Tips

Get better parts for less

Strength follows the layers

FFF parts are strongest along the layers (X-Y). Tell us the load direction and we will orient the part to suit it.

Large parts in one piece

With a 500 x 340 x 485 mm build volume, big jigs, fixtures and housings print in one piece without joints.

Fillets, not sharp corners

Rounded inside corners spread stress and reduce warping on long, flat parts.

Send STEP when you can

We accept STL and STEP. STEP keeps exact geometry, which helps when holes or fits matter.

FAQs

FFF design questions

What is the minimum wall thickness for FFF?

1 mm. For walls that carry load we recommend 2 mm or more.

How accurate are FFF parts?

Typically ±0.5%, with a lower limit of ±0.3 mm. Tell us which dimensions are critical.

Will you check my design?

Yes. Our engineers review every order before printing and will tell you if a wall, hole or overhang is likely to cause a problem.

Ready to print?

Upload your STL or STEP file for an instant price. Our engineers check your design before printing.