
Stereolithography (SLA)
High-detail resin parts with smooth finishes.
Strong, support-free nylon parts built layer by layer — our go-to for functional, production-grade parts, made in our Milton Keynes facility.

Selective Laser Sintering (SLS) uses a laser to fuse fine polymer powder into solid parts, layer by layer. Because the surrounding powder supports each layer, SLS needs no support structures and can produce complex geometries, internal features and interlocking assemblies that are difficult or impossible with other processes.
Parts come out with the dimensional accuracy and strength of a final product, making SLS one of the best choices for functional parts, high-quality prototypes and mass production. SLS parts are also suitable for vapour smoothing, which gives them an injection-moulding-quality surface.
| Material | PA12 (polyamide 12) |
|---|---|
| Colour | black |
| Build volume | 400 x 400 x 540 mm |
| Layer thickness | 0.1 mm |
| Support structures | none needed |
An advanced PA12-based polymer for a wide variety of industrial applications: balanced thermal properties, excellent mechanical properties, a surface that is easy to post-process, high oxidation resistance and low water absorption.
| Tensile strength (ISO 527-1, XY) | 48.2 MPa |
|---|---|
| Elongation at break | 22% |
| Heat deflection temperature at 0.45 MPa (ISO 75) | 147 °C |
| Melting point (ISO 11357-1) | 184 °C |
| Part density | 1.02 g/cm³ |
Typical values from the PA12 datasheet; indicative only.
SLS design guide: wall thickness, holes, clearances and tolerances
Our SLS parts are produced in black PA12 nylon. Contact us for the full datasheet.
Up to 400 x 400 x 540 mm in one piece.
No. SLS is self-supporting, so complex geometries and assemblies print without supports.
Yes. We nest multiple parts per build and can scale from one-offs to repeat production runs.
Yes. Vapour smoothing seals the surface and gives an injection-moulding-quality finish, including internal channels.

High-detail resin parts with smooth finishes.

Cost-effective thermoplastic parts for prototypes.

Sealed, smooth surfaces for SLS and FFF parts.
Upload your 3D model for an instant price, or talk to our engineers about your project. Every part is made in our Milton Keynes facility.
